Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
388
of
473
RIP Interface Configuration
This page lets you configure RIP interface parameters. Navigate to the System > RIP > Configuration > Interfaces
menu path.
Passive Interface
Figure 22-1.5: RIP Interface Configuration
Parameter descriptions
:
Interface
: At the dropdown select
_______, _______ , or ________
.
The default is ‘Not Specified’.
Send Version
: There are two dropdown selections:
_____________ and ______________
. The first default is
‘Not Specified’
.
The second default is ‘Split Horizon’
.
‘Split Horizon’ prevents routing loops in distance-vector
routing protocols by prohibiting a router from advertising a route back onto the interface from which it was
learned.
Receive Version
: At the dropdown select
_______, _______ , or ________
. The default is ‘Null Authentication’.
Split Horizon Mode
: Enter the
________________ and ______________.
RIP is susceptible to routing loops; it
uses the split horizon mechanism to prevent routing loops from forming.
Auth Type
: Enter the type of authentication to use;
plain text or MD5 authentication
Change Simple Password / Key-Chain Name
: Enter a new simple password and keychain name.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
