Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
413
of
473
Activate
You can activate any of the config files present on the switch, except for running-config which represents the
currently active configuration.
Select the file to activate and click the “Activate Configuration” button. This will initiate the process of
completely replacing the existing config with that of the selected file.
Web Interface
To activate a configuration in the web UI:
1.
Click Maintenance, Configuration and Activate.
2.
Select a configuration file to activate. The previous configuration will be completely replaced, potentially
leading to loss of management connectivity.
3.
Note
: The activated configuration file will NOT be saved to startup-config automatically.
4.
Click the Activate Configuration button.
Figure 24-1.4: Activate Configuration
Parameter descriptions
:
File Name
: Check a radio button for the file to be activated.
Buttons
Activate Configuration
: Click the button and the selected file will be activated to be the switch's running
configuration.
