4: Network Settings
xPico® Wi-Fi® Embedded Device Server User Guide
29
Using XML
Not applicable.
Table 4-8 WLAN Quick Connect
WLAN Quick Connect
Settings
Description
Network Name
(search field)
Enter a network name and click Scan to search for a network.
Scan “<network SSID>”
Perform a scan for devices within range of the xPico Wi-Fi. Including the
optional network SSID limits the scan to devices configured with the
specified network SSID. Omitting the network SSID performs a scan for all
devices in range.
Network Name
(link)
Lists the SSID of a network. Click a specific
Network Name
to display the
Quick Connect profile. If you provide the
Password
for a specific Quick
Connect Profile, you can add that profile to your list of
WLAN Profiles
. Up
to four WLAN profiles may be added, and only one may be connected at
any given time.
BSSID
Lists the basic service set identifier. This is a unique 48-bits address that
identifies the access point that creates the wireless network.
CH
Provides the channel number of a network.
RSSI
Displays an instantaneous value indicating the signal strength of the
network. The best to worst signal strength is indicated by green, yellow and
red respectively.
Note:
RSSI reported in scan results is a single sampling.
Security Suite
Lists the security suite of a network (e.g., WEP, WPA, WPA2).
