Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide
99
configitem Trailing Character
value
The
Trailing Character
is an optional single printable character or control character that is injected into
the outgoing data stream right after the
Send Character
.
Control characters may be input in any of the following forms:
<control>J
0xA (hexadecimal)
\10 (decimal)
Disable the
Trailing Character
by blanking the field to set it to <None>.
Trailing Character
may contain one character, where <control>J, for example, counts as
one.
