Lanzar Optidrive OPTIX-6, Owner'S Manual And Installation Manual

 - 2 -

CONTROLS AND OPERATION

5. LEFT/RIGHT FRONT CHANNEL SIGNAL INPUTS:

 To be connected to the front channel output of the source 

unit.

1.POWER INPUT TERMINAL(12V): 

To be connected to the positive terminal of your vehicle 

battery or other co12V source.

2.GROUND INPUT TERMINAL: 

To be wired to the vehicle's chassis ground.

3.REMOTE TURN-ON INPUT TERMINAL(REMOTE): 

To be connected to the remote control wire or 

antenna lead of the source unit for remote ON/OFF.

4. POWER INDICATOR:

 This indicator lights up when the internal switching power supply is activated and the 

unit is operational.

Set to “

IN”

 position the input signals coming in through the front channel signal inputs are split 

and directed to the front and rear channels simultaneously. (This feature is to be engaged where 
the source unit has no separate front, rear or subwoofer channel outputs) 
If the source unit has independent front and rear channel outputs, disengage the parrel input by 
sliding the switch to the 

“OUT”

 position

8. LEFT/RIGHT DUAL IN/OUT TERMINALS
As Input Terminal:

To be connected to the subwoofer output of the source unit.

As Output Terminal:

To be connected to the front channel input terminal of another electronic 

                  crossover in a multi-crossover system.

7. LEFT/RIGHT REAR CHANNEL SIGNAL INPUTS: 

To be connected to the rear channel outputs of the source 

unit. BUT MAKE SURE THAT THE DUAL INPUT SWITCH IS AT THE OUT POSITION.

6. DUAL INPUT SWITCH