LPMVC-CL025M Manual
More than Imaging – Laon People
50
2016-03-04
6.3.3.
Test Pattern
Set the Test Pattern on whether to output or not and what to output.
None
The Test Pattern is not used.
Pattern #1
Output Pattern Image increasing the brightness from left to right.
Pattern #2
Output Pattern Image increasing the brightness value from 0 to 255.
Pattern #3
Output Pattern Image which has special pattern and increase the
brightness from left to right.
6.3.4.
Image Taps
Represent the image output tab information of the camera.
10-Tap
10-Tap output.
8-Tap
8-Tap output.
4-Tap
4-Tap output.
2-Tap
2-Tap output.
6.3.5.
ROI
Set the region on the ROI.
X Start, Y Start
Set starting position of the ROI area.
Width, Height
Set horizontal/vertical size of the ROI area.
QUARTER,
HALF
Set the 1/4 or 1/2 size in the center of the screen as a ROI area
from the maximum size that camera supports.
Center
Set the region of the ROI in the center of the screen while
maintaining the current size of the ROI area.
Left-Top
Set the Left-Top of the ROI area as to (0, 0).
Right-Bottom
Set the Right-Bottom of the ROI area as to the maximum size supported.
Set ROI
Applies the current ROI area to the camera.
If user set the ROI to the camera, the CULaTor will set the maximum frame rate that can
be supported by the current ROI. This value can be found in the Frame Rate item in
6.4.4.