LPMVC-CL025M Manual
More than Imaging – Laon People
26
2016-03-04
4.6.
JTAG Connector
The JTAG Connector of the LPMVC-CL025M applied USB Micro-B Type and consists of
JTAG of FPGA. JTAG used for updating FPGA firmware. Pin arrangement and
configuration are as follows:
Figure 12. LPMVC-CL025M JTAG Connector
Pin Number
Signal Name
Type
Description
1
VREF
Input
Reference voltage
2
TMS
Input
Test mode
3
TDI
Input
Data input
4
TDO
Output
Data output
5
TCK
Input
Test clock
Shield
GND
Input
Ground
Table 9. Pin Assignments for LPMVC-CL025M JTAG Connector