LPMVC-CL025M Manual
More than Imaging – Laon People
29
2016-03-04
5.
Camera Functions
5.1.
Region Of Interest (ROI)
ROI is the area specified by the user from the entire image. If the user specifies the ROI,
the user can transmit images faster than transmitting whole image. The more decrease
the horizontal width and the vertical width of ROI, the more increase the transmission
speed.
The starting position of the X-axis which can be specified in the LPMVC-CL025M is
possible by multiples of 128, and horizontal width is possible by multiples of 64. The
starting position of the Y-axis and Vertical width is possible by multiples of 2.
5.2.
Test Pattern
Test pattern is a function that can be used to transfer the normal image data created by
the camera itself. LPMVC-CL025M supports 3 test patterns as bellow figures.
<Test Pattern 1> <Test Pattern 2> <Test Pattern 3>
Figure 15. LPMVC-CL025M Test Patterns
5.3.
Analog/Digital Gain
User can make the image data lighter than before by increasing the Analog/Digital gain.
Supported analog gains are
『
x1.0, x1.39, x1.94, x2.72
』,
and digital gains are
『
1.00 ~
31.99
』
.