ⓒ
2019
LaON
Technology Co., Ltd. All rights reserved.
28
Microphone gain menu
Move to Microphone gain menu, press Set button to select and adjust headset microphone gain level with Up
or Down button.
Microphone gain up
Every time you press the volume up button, increased voice level will be heard from the headset while you
are speaking to headset microphone. When the level is reached out to a maximum, a voice message,
‘maximum’ will be heard from the headset.
Microphone gain down
Every time you press the volume down button, decreased voice level will be heard from the headset while
you are speaking to headset microphone. When the level is reached out to a minimum, a voice message,
‘minimum’ will be heard from the headset.
Sidetone menu
Move to Sidetone menu, press Set button to select and adjust headset Sidetone volume with Up or Down
button.
Sidetone Up
Every time you press the volume up button, a beep sound will be heard from the headset. When the level is
reached out to a maximum, a voice prompt, ‘maximum’ will be heard from the headset
.
Sidetone Down
Every time you press the volume down button, a beep sound will be heard from the headset. When the level
is reached
out to a minimum, a voice prompt, ‘minimum’ will be heard from the headset
.
Two groups menu
Two groups menu is to set a ‘simultaneous listen mode’ for selected two groups within the allocated group
channels to the Beltpack. Once the Two groups mode is set, GRP button (#5) on the front panel of the
Beltpack works as Talk button for the latter group selected in the Two groups menu screen. And the Talk
button (#3) is to talk to the former group selected in the Two groups menu screen. Pressing either Talk or
GRP button enables to talk to either group. And pressing both Talk and GRP buttons at the same time allows
talking to both groups at the same time. Meanwhile, in Two groups mode, both two groups set will always be
heard.
Move to the Two Groups menu and press Set to the edit mode. Move to the desired Communication group
number to select by pressing Up or Down button and press Set on the number. Then the Communication
group number will show dark text on a light background
.
On the screen of the Two groups menu, initially
allocated Communication group numbers to the Beltpack will only be displayed. And, setting two groups is
necessary for the Two groups mode. Otherwise, the set value will not be saved. To reset the groups, reverse
all the set values. Move to Quit on the menu with Up or Down button and press Set to save.
Talk LED operation in Two groups
⚫
Solid green: Listen and talk mode by pressing Talk button.
⚫
Green flashing slowly: Listen only mode
⚫
Solid orange: Listen two groups and talk to latter group which works with GRP button
⚫
Orange flashing rapidly: Listen and talk both groups which works by pressing both Talk and GRP button
NOTE
: Two groups menu will not appear if there is initially only one group channel is allocated or if the
system is in the Master Beltpack (MB) mode.
Figure 4-28.
Two groups menu
Figure 4-27. Sidetone menu
Figure 4-26. Microphone gain menu
