Names of Parts of GPS receiver
1. Built-in GPS antenna
１
２
３
４
５
６
７
GPS antenna is inside.
2. Power lamp(Blue)
The lamp illuminates when the power is
on.
3. Status lamp(Red)
The lamp illuminates or flashes when
receiving information from the satellite.
4. Power port
Insert the power connector.
5. Communication cable
Connected to the COM port of Lapcom
unit.
6. Battery snap
Used for 9V square type battery.
7. Power connector
Connect to 12V power or 9V square type battery on the other side, and insert to
the power port of the GPS receiver.
Specification
Size 50x30x20
mm
Available voltage
DC7.5 to DC14.5V
Consumption current
10mA
Hot start
1.0 sec
Cold start
35 sec
- 1 -
