4
5
Overview
Your FLEX ™ Locker Tower is supplied fully assembled and correctly
installed.
Each locker has its own individual lock and there are separate instructions
for the use of the locks fitted on your particular FLEX™ Tower.
There is a manufacturing option to have a power socket and two USB
changing sockets inside some, or all, of the lockers.
The power to the locker sockets, if fitted, is managed through a Power
Cassette that is fixed on the top of your FLEX™ Tower.
Locker Door Operation
Once the door lock is released the hinges allow the locker door to swing
freely until it meets an obstacle. There is no ‘bump-stop’ built into the
hinge so care must be taken when opening a locker that there is sufficient
clear space for the door to move into.
Do not let go of the door while it is moving and do not force the door in
either direction. Both of these actions could damage the door or the
locker carcase or an adjacent locker unit.
Should a door become misaligned in use there is adjustment in the hinges.
In the centre of the hinge-cup in the rear of the door there is a screw that
can be loosened to allow re-adjustment.
Re-tighten the screw after any adjustment.
