background image

12

The Traveller™ Charge & Sync Range - User Manual

Copyright LapSafe® Products

Button modes

The lights on the charge and sync unit explains which mode it is in; sync and 
charge, charge and sync or auto cycles:

AMBER

 light off, 

GREEN

 light flashing slowly, and 

BLUE

 light on 

– synchronising will commence once the devices are connected 
to host laptop or MacBook. Charging will  commence once the 
synchronising has finished or timed out.

Note: 

If no host device is connected when the unit is switched on 

charging will commence. (

GREEN

 light off, 

AMBER

 light comes on 

to indicate charge and will blink to confirm full charge).

‘All Off’ mode

Pressing once after power-up will select ‘All Off’ mode.

AMBER

 and 

GREEN

 lights off, 

BLUE

 light blinking briefly = Power 

on with no activity.

From the ‘All Off’ mode, pressing the black button again will select ‘All Charge’ 
mode.

‘All Charge’ mode

Pressing twice after power-up, will also select ‘All Charge’ mode.

BLUE

 and 

GREEN

 lights off, 

AMBER

 light flashing slowly - waiting 

for iPads/tablets to be connected = charging on standby.

Figure 16

Connecting supplied USB lead

Summary of Contents for Traveller series

















Reviews: