![background image](http://html1.mh-extra.com/html/lapsafe/traveller-series/traveller-series_user-manual_676337007.webp)
7
Copyright LapSafe® Products
The Traveller™ Charge & Sync Range - User Manual
Figure 5
Foam plug
Figure 7
Unscrewing power unit
Figure 6
Plastic cover
Figure 8
Removing securing plate
To load the USB charge/sync leads, first withdraw the power management unit
(small black box) from the case. To do this, carefully remove the four screws
securing the retaining plate to the inner side of the case (
Figure 7
) and ease the
plate and the power management unit upwards to remove them from the case
(
Figure 8
).
Connect a USB charge/sync lead into each individual USB socket along the edges
of the power management unit (
Figure 9
). and carefully lower this assembly back
into the foam. Refit the screws through the retaining plate. Each USB charge/sync
lead now has to be routed to an individual device.