3
INSTRUCTION FOR USE
Before first use, fill the kettle with clean
water to maximum capacity and
boil
．
Discard the water and repeat the
process
．
- The kettle should always be unplugged
when filling or adding water.
- Fill the kettle with water to desired
level. Do not overfill, or there will be a
risk of spillage or spitting. The water
level indicator will assist you to measure
the correct amount. You can fill the ket-
tle via the spout or after opening the lid.
Do not forget to close the lid after filling,
otherwise the kettle will not automati-
cally switch off after use
．
- Do not fill with less than 0.5 liters of
water
（
to “min” indication
）
to prevent
the kettle running dry while operating
．
- Do not fill with more than 1.7 liters of
water
（
to “max” i
ndication
）．
- An automatic safety cut-off has been
fitted for protection against overheating,
it will operate if the kettle is switched on
when containing insufficient water. Al-
ways ensure the water inside the kettle
covers the minimum mark on the water
level indicator gauge. If the automatic
safety cut-off has operated, switch the
kettle off, disconnect from the power
outlet and allow the kettle to cool down
for 5 to 10 minutes. Then refill and
switch on, the kettle will work as
normal
．
- After boiling, the kettle switches off
automatically. Disconnect the kettle
from the mains electricity supply.
- Do not open the lid when pouring. If
the kettle is overfilled, boiling water
may be ejected.
- The kettle is only to be used with the
base provided.
- This appliance is intended to be used
in household and similar applications
such as:
a) staff kitchen areas in shops, offices
and other working environments;
b) farm houses;
c) by clients in hotels, motels and other
residential type environments;
d) bed and breakfast type environments.
Basal operation
1) Put the base on the dry, smooth and
horizontal plane, insert the plug to the
socket. When the kettle is inserted into
the Base, the power puts through auto-
matically
．
2) Press the
button shortly, with
the sound “Di.”,
it starts running.
button twinkles, it means the water
starts heating.
3) After the water boils, indicator turns
off and the buzzer sends out a “di
-
”
sound at the same time.
Self-defining operation
1) Press the
button shortly, with
the sound “Di.”,
it starts running. Then
press
button, with the sound
“Di”
from buzzer, starts dechlorination, after
water boiling, the buzzer sends out
“Di”
“Di”
sound. It will stop heating automat-
ically after boiling 3 minutes and sounds
like “Di” “Di”,
dechlorination finished.
2) Press
shortly, with the buzzer
sends
out “di” sound,
the kettle starts
boiling function. Press
button, with
the buzzer sends out “di” sound,
you
select
“
keep warm
”
function, when fin-
ished boiling,
twinkles, it means
kettle starts
“
keep warm
”
function for 2
hours, which will go on heating when
water temperature arrives at 90
℃
till
the 2 hours heat insulation time is com-
pleted.
3) Press
shortly, with the buzzer
sends out “di” soun
d, the kettle starts
boiling function. Press
button, with
the buzzer sends out “di” sound,
you
select
“
keep warm
”
and
“
boiling
”
func-
tion. Press
button one time, it
shows 40
℃
on the display,
button
twinkles, when water reaches 40
℃
and
kettle starts
“
keep warm
”
function au-
tomatically.
twinkles, it means ket-
tle starts
“
keep warm
”
function for 2
hours, which will go on heating when
water temperature arrives at 30
℃
till
the 2 hours heat insulation time is com-
pleted. Press
button two times, it
shows 50
℃
on the display,
button
twinkles, when water reaches 50
℃
and
kettle starts
“
keep warm
”
function au-
tomatically.
twinkles, it means ket-
tle starts
“
keep warm
”
function for 2
