Using the Macro ( )
1. The macro mode is used to take a close-up
photos up to 8 inches. Slide the macro switch
from Standard to Macro mode. The " " icon
appears on the LCD monitor.
2. Press the on/off " " button. The camera will
beep.
Adjusting the Exposure Compensation
Adjust the exposure compensation setting to
obtain the optimum image brightness (Exposure)
when the subject is much brighter or darker than
the background.
1. Press the "
EV
" button to get into the Exposure
Value mode. The exposure compensation bar
will appear on the LCD monitor.
2. Press the
button. The brightness of the
subject will be adjusted according to the exposure value. You can
see the change on the LCD monitor.
" " or " "
3. Press the “
OK
" button to exit.
NOTE
The settings can be adjusted in 1/2 increments in the range
of -2.5EV~+2.5EV. The higher the value, the greater the exposure
(brightness).
18
NOTE
In the macro mode, the flash will be turned off.
