26
EXCALIBUR LINER
English
N18
N27
N25
N26
N28
P17
•
Insert the stem (
N18
) into the housing (
N17
) rotating it as
you do so in order to allow it to slide more easily and to avoid
damaging the upper gaskets.
•
Lubricate the O-ring (
N29
)
(Ref. 16126)
with grease, as
shown.
Vaseline is recommended for this task.
•
Replace the grey polyethylene lipped gasket (
N25
) for the
valve piston.
•
Refit according to the assembly order and the alignment of
the lip
(as shown)
.
Check the surfaces of the ball (N26) and ball seating
(N27), and replace both if damaged.
•
Assemble the components as shown.
•
Lubricate the gaskets (
N28
) and the stem.
Vaseline is recommended for this task.
N29