Ed. 003 - 02/2013
The high speed of the product in the hose can create
static electricity through discharges and sparks. It
is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply.
The gun is earthed through the high pressure
flexible hose.
All the conductors near the work area must be
earthed.
• NEVER SPRAY OVER FlAMMABlE PROdUCTS OR SOl-
VENTS IN ClOSEd PlACES.
•
NEVER USE THE TOOlING IN PRESENCE OF POTEN-
TIAllY EXPlOSIVE GAS.
Always check the product is compatible with the
materials composing the equipment (
pump, spray
gun, flexible hose and accessories
) with which it
can come into contact. Never use paints or solvents
containing halogen hydrocarbons (
as the methy-
lene chloride
).
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
IF THE PROdUCT TO BE USEd IS TOXIC, AVOId IN-
HAlATION ANd CONTACT BY USING PROTECTION
GlOVES, GOGGlES ANd PROPER FACE SHIEldS.
TAKE PROPER SAFETY MEASURES FOR THE
PROTECTION OF HEARING IN CASE OF WORK
NEAR THE PlANT.
• WHENEVER YOU STOP dISPENSING, EVEN FOR A MO-
MENT, AlWAYS SET THE GUN TRIGGER lOCK. FUllY
RElEASE THE TRIGGER ANd ROTATE THE TRIGGER
lOCK FORWARd (see page 9).
• USE EXTREME CAUTION WHEN ClEANING OR CHAN-
GING THE FlUId NOZZlE. IF THE NOZZlE ClOGS
WHIlE dISPENSING, FUllY RElEASE THE TRIGGER
IMMEdIATElY. AlWAYS FOllOW THE PRESSURE RElIEF
PROCEdURE, BElOW, BEFORE WIPING OFF BUIld-UP
AROUNd THE NOZZlE OR REMOVING THE NOZZlE TO
ClEAN IT.
•
dO NOT POINT THE GUN UPWARdS dURING ClEANING
OPERATIONS.
•
dO NOT USE METAl TOOlS TO ClEAN THE NOZZlES,
SINCE THEY MAY BE SCRATCHEd ANd CAUSE UNEVEN
SPRAYING.
•
dO NOT RUB THE SPRAYGUN WITH ClOTHS SOAKEd
IN SOlVENT.
•
dO NOT IMMERSE THE SPRAYGUN IN SOlVENT.
www.larius.com
L400 SPRAYING GUN
11