Ed. 003 - 02/2013
NEVER point the spray gun at yourselves or at
other people. The contact with the casting can
cause serious injuries. In case of injuries caused
by the gun casting, seek immediate medical advice
specifying the type of the product injected.
Symmetrical trace of spraying a
fluid using air.
No tail-end is formed.
Trace of spraying a fluid at low-
pressure without using air.
ADJUSTING SPRAYING NOZZLE
• The spraying nozzle can be adjusted according to need by
setting the pump operating pressure and the atomization
pressure until reaching the required operating conditions.
•
For proper spraying of the product, the air and paint coming
out of the gun must leave a spraying trace without tails.
• At this point, the product will flow until reaching the gun and
you can start working.
TRIGGER LOCK DISENGAGED
To disengage the trigger lock (
O1
), rotate the trigger lock back-
ward.
TRIGGER LOCK ENGAGED
To engage the trigger lock, release the trigger and rotate the
trigger lock (
O1
) forward.
www.larius.com
L400 SPRAYING GUN
16
A
B
O1
O2
Safety engaged
Safety disengaged