Ed. 003 - 02/2013
ROUTINE MAINTENANCE
To reduce the risk of serious injury, including fluid injection or splashing the eyes or on the skin:
• Always follow the PRESSURE DISCHARGING PROCEDURE (
see page 8
) before checking, adjusting, cleaning
or repairing the gun or any part of the system.
•
After adjusting or servicing the gun, if fluid does flow, the gun is not assembled properly or the trigger lock is
damaged. Reassembled the gun or return it to your nearest distributor. Do not use the gun until the problem
is corrected.
• When removing the gun from the hose, be sure to hold the inlet fitting securely to avoid loosening from the
gun body.
REPLACE PRODUCT FILTER
ATTENTION
:
for further details, please refer to the drawing on page 22
To replace the product filter, proceed as follows:
• Use the provided wrench (
P1
).
• loose and remove the fitting (
P2
)
• Remove the product filter (
P3
) and replace it with a new one.
NOTE: should the filter be blocked, use the pliers to remove
it easily.
P
On first use of the gun check for any leaks of
product from the ring
(
P2
).
• Insert the new filter (
P3
) as shown in the picture.
• duly place the fitting in its seat (
P2
).
www.larius.com
L400 SPRAYING GUN
17
P1
P2
Product filter
P3