Ed. 003 - 02/2013
• Slide the air valve (
P66
) until it comes out from the front side
of te gun body by using the provided wrench (
P67
).
• Reassemble the springs (
P68
) and (
P69
) and the cap (
P70
).
• Reasssmble the cap (
P71
) by using the provided wrench
(
P72
).
• Screw the nut (
P74
) and the pivot (
P75
) with the provided
wrench (
P76
) to reassemble the trigger (
P73
).
• Hold the trigger and reassemble the coupling (
P78
) and the
ring nut (
P77
).
At this point the procedure for the air valve gasket replacement
is completed.
REPLACE THE BUSHING GASKET FOR AIR ADJUSTMENT
NEEDLE
ATTENTION
:
for further details, please refer to the drawing on page 22
To replace the air valve gasket, porceed as follows:
• Unscrew the hex nut of the air regulator (
P79
) with the provided
wrench.
• Remove completely the air regulator from the gun body (
P80
).
www.larius.com
L400 SPRAYING GUN
23
P67
P68
P70
P69
P72
P71
P73
P74
P75
P76
P73
P77
P78
P79
P80
P66