Ed. 003 - 02/2013
FIRE ANd EXPlOSION HAZARd
Solvent and paint fumes in work area can ignite or explode.
To help prevent fire and explosion:
- Use equipment ONlY in well ventilated area.
- Eliminate all ignition sources, such as pilot lights, cigarettes and plastic drop cloths (potential static arc).
- Ground equipment and conductive objects.
- Use only grounded hoses.
- do not use trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such
solvents in pressurized aluminium equipment. Such use can cause serious chemical reaction and equipment rupture,
and result in death, serious injury, and property damage.
If electrical shocks or discharges are encountered the operation being carried out using the equipment must be stopped
immediately.
Keep a fire extinguisher at hand in the immediate vicinity of the work area.
WARNINGS
The table below provides the meaning of the symbols used in this manual in relation to using, earthing,
operating, maintaining, and repairing of this equipment.
Read this operator’s manual carefully before using the equipment.
An improper use of this machine can cause injuries to people or things.
do not use this machine when under the influence of drugs or alcohol.
do not modify the equipment under any circumstances.
Use products and solvents that are compatible with the various parts of the equipment, and read the manufacturer’s warnings
carefully.
See the Technical details for the equipment given in the Manual.
Check the equipment for worn parts once a day. If any worn parts are found, replace them using ONlY original spare parts.
Keep children and animals away from work area.
Comply with all safety standards.
It indicates an accident risk or serious damage to equipment if this warning is not followed.
It indicates important recommendations about disposal and recycling process of products in accordance with the environ-
mental regulations.
Report any risk of chemical reaction or explosion if this warning has not been given.
There is a risk of injury or serious lesion related to contact with the jet from the spray gun. If this should occur, IMMEdIATElY
contact a doctor, indicating the type of product injected.
do not spray before the guard has been placed over the nozzle and the trigger on the spray gun.
do not put your fingers in the spray gun nozzle.
Once work has been completed, before carrying out any maintenance, complete the decompression procedure explained in
this manual.
It reports any danger of electric shock if the warning and presence of live electrical parts has not been indicated.
Store in a dry place and do not expose to the rain.
Check that the cables are in good condition.
Switch off the equipment and discharge any electricity before cleaning or maintaining the equipment.
It indicates the presence of any clamps with earth cables.
Use ONlY 3-wire extension cords and grounded electrical outlets.
Before starting work make sure that the electrical system is earthed and that it complies with safety standards.
www.larius.com
L400 SPRAYING GUN
7