Ed. 003 - 02/2013
A
INJECTION HAZARd
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin.
To help prevent injection, always:
- Engage trigger lock when not spraying.
- do not put your hand over the spray tip. do not stop or deflect leaks with your hand, body or other.
- do not point gun at anyone or at any part of the body.
- Never spray without tip guard.
- do pressure relief if you stop spraying or being servicing sprayer and before any maintenance operations.
- do not use components rated less than sprayer Maximum Working Pressure.
- Never allow children to use this unit
- Brace yourself; gun may recoil when triggered.
If high pressure fluid pierces your skin, the injury might look like “just a cut”, but it is a serious wound! Get
immediate medical attention.
0
0 BAR
0 PSI
WORKING PRINCIPLE
MIST-LESS
painting combines the qualities of airless technology
with those of low-pressure application providing superior quality
finishing with less material waste.
The
MIST-LESS
sprayguns allows:
- 15-35% product saving
- Overspray reduced to the minimum
- High quality finishing
The
MIST-LESS
sprayguns are equipped with a self-cleaning
nozzle with the following advantages:
- Reduced maintenance
- long working life
- The nozzle does not have to be removed for cleaning, but simply
turned 180°, based on the same principle as Fast-Clean.
TECHNICAL DATA
B
*Available on request
PARTS OF THE SPRAY-GUN IN CONTACT WITH THE MATERIAl
Stainless steel AISI 420B, PTFE, Aluminium, Stainless Steel AISI
303, Tungsten carbide
MANUAL VERSION
Max operating pressure
Air inlet
Inlet port size
Weight
250 bar (3625 psi)
ø=8mm
STANdARd Gj 1/4" (M)
1/4" NPS (M)*
590 g
MIST-LESS GUN
187
147
240
It is obligatory to wear suitable clothing as gloves, goggles and face shield.
Wear clothing that complies with the safety standards in force in the country in which the equipment is used.
do not wear bracelets, earrings, rings, chains, or anything else that may hinder the operator’s work.
do not wear clothing with wide sleeves, scarves, ties, or any other piece of clothing that could get tangled up in moving
parts of the equipment during the work, inspection, or maintenance cycles.
www.larius.com
L400 SPRAYING GUN
8
