Ed. 003 - 02/2013
C
D
TRANSPORT
AND UNPACKING
SAFETY RULES
•
THE EMPlOYER SHAll TRAIN ITS EMPlOYEES ABOUT
All THOSE RISKS STEMMING FROM ACCIdENTS, ABOUT
THE USE OF SAFETY dEVICES FOR THEIR OWN SAFETY
ANd ABOUT THE GENERAl RUlES FOR ACCIdENT
PREVENTION IN COMPlIANCE WITH INTERNATIONAl
REGUlATIONS ANd WITH THE lAWS OF THE COUNTRY
WHERE THE PlANT IS USEd.
• THE BEHAVIOUR OF THE EMPlOYEES SHAll STRICTlY
COMPlY WITH THE ACCIdENT PREVENTION ANd AlSO
ENVIRONMENTAl REGUlATIONS IN FORCE IN THE
COUNTRY WHERE THE PlANT IS INSTAllEd ANd USEd.
The disposal of packaging materials is a customer’s
competence and must be performed in accordance
with the regulations in force in the country where
the plant is installed and used.
It is nevertheless sound practice to recycle packa-
ging materials in an environment-friendly manner
as much as possible.
• The manufacturer will not be responsible for the unloading
operations and transport to the workplace of the machine.
•
Check the packing is undamaged on receipt of the equip-
ment.
Unpack the machine and verify if there has been any
damage due to transportation.
In case of damage, call immediately
LARIUS
and the
Shipping Agent. All the notices about possible damage or
anomalies must arrive timely within 8 days at least from
the date of receipt of the plant through Registered letter
to the Shipping Agent and to
LARIUS
.
Read carefully and entirely the following instructions
before using the product.
Please save these instructions in a safe place.
The unauthorised tampering/replacement of one
or more parts composing the machine, the use of
accessories, tools, expendable materials other than
those recommended by the manufacturer can be
a danger of accident.
The manufacturer will be relieved from tort and
criminal liability.
• KEEP YOUR WORK PlACE ClEAN ANd TIdY. dISORdER
WHERE YOU ARE WORKING CREATES A POTENTIAl
RISK OF ACCIdENTS.
•
AlWAYS KEEP PROPER BAlANCE AVOIdING UNUSUAl
STANCE.
•
BEFORE USING THE TOOl, ENSURE THERE ARE NOT
dAMAGEd PARTS ANd THE MACHINE CAN WORK PRO-
PERlY.
• AlWAYS FOllOW THE INSTRUCTIONS ABOUT SAFETY
ANd THE REGUlATIONS IN FORCE.
•
KEEP THOSE WHO ARE NOT RESPONSIBlE FOR THE
EQUIPMENT OUT OF THE WORK AREA.
•
NEVER
EXCEEd THE MAXIMUM WORKING PRESSURE
INdICATEd .
•
NEVER
POINT THE SPRAY GUN AT YOURSElVES OR AT
OTHER PEOPlE . THE CONTACT WITH THE CASTING
CAN CAUSE SERIOUS INJURIES.
•
IN CASE OF INJURIES CAUSEd BY THE GUN CASTING,
SEEK IMMEdIATE MEdICAl AdVICE SPECIFYING THE
TYPE OF THE PROdUCT INJECTEd.
NEVER
UNdERVA-
lUE A WOUNd CAUSEd BY THE INJECTION OF A FlUId.
•
AlWAYS dISCONNECT THE SUPPlY ANd RElEASE THE
PRESSURE IN THE CIRCUIT BEFORE PERFORMING ANY
CHECK OR PART REPlACEMENT OF THE EQUIPMENT .
•
NEVER MOdIFY ANY PART IN THE EQUIPMENT. CHECK
REGUlARlY THE COMPONENTS OF THE SYSTEM. RE-
PlACE THE PARTS dAMAGEd OR WORN.
•
TIGHTEN ANd CHECK All THE FITTINGS FOR CONNEC-
TION BETWEEN PUMP , FlEXIBlE HOSE ANd SPRAY
GUN BEFORE USING THE EQUIPMENT.
•
AlWAYS USE THE FlEXIBlE HOSE SUPPlIEd WITH
STANdARd KIT. THE USE OF ANY ACCESSORIES OR
TOOlING OTHER THAN THOSE RECOMMENdEd IN
THIS MANUAl, MAY CAUSE dAMAGE OR INJURE THE
OPERATOR.
•
THE FlUId CONTAINEd IN THE FlEXIBlE HOSE CAN
BE VERY dANGEROUS . HANdlE THE FlEXIBlE HOSE
CAREFUllY . dO NOT PUll THE FlEXIBlE HOSE TO
MOVE THE EQUIPMENT . NEVER USE A dAMAGEd OR
A REPAIREd FlEXIBlE HOSE.
www.larius.com
L400 SPRAYING GUN
9
