11
MIST-LESS GUN
English
CONNECTING THE PRODUCT DELIVERY HOSE
•
Connect the flexible product delivery hose (
N4
) to the delivery
coupling (
N5
) of the pump.
Lock the nut (
N6
) using the dedicated wrench (
N7
).
NEVER
use sealants on fittings’ threads.
It is recommended to use the hose provided with the
standard kit.
NEVER
use a damaged or a repaired flexible hose.
•
Connect the flexible product delivery hose (
N4
) to the gun
(
N8
).
Lock the nut (
N6
) using the dedicated wrench (
N7
).
Fluid flow rate is controlled at the pump.
Adjust the pump pressure to obtain the desired flow rate; use
lowest pressure necessary.
The pressure adjustment will depend on hose length, the viscosity
of the fluid, and the nozzle size.
To dispense fluid with the gun, start the supply pump, disengage
the trigger lock, and squeeze the trigger in all the way.
Fluid flow beings with the slightest pressure and stops when
trigger is released.
O
OPERATION
To reduce the risk of serious injury, including fluid
injection or splashing in the eyes or on skin, always
follow the PRESSURE RELIEF PROCEDURE
(on
page 8)
whenever the dispensing equipment is
shut off, when checking or servicing any part of
system, when installing or changing nozzles and
whenever you stop dispensing.
Always engage the trigger lock when the flo-gun
is not in use to prevent accidental triggering of
the gun.
N7
N5
N4
N8
N6
N9
N7
N4
Product delivery hose
Air hose
