Ediz. 02 - 07/2016
www.larius.eu
19
PEGASO
R
S
If you suspect that there may be residual pressure in the hoses due to material clogging, loosen the
metal hose clamps very slowly until you feel a decrease in pressure owing to the expulsion of the
material.
• After having carried out all the operations described in the chapter concerning cleaning up after work, make
sure that the system is not pressurised.
•
Squeeze the trigger and wait for all the material to have come out.
•
To move the sprayer backwards or forwards it is necessary to tilt it slightly. This is done by lightly pushing on
the handles with your hands and simultaneously pushing downwards with one of your feet on the footplate
PROCEDURE OF DECOMPRESSION
MOVING THE SPRAYER
