Ediz. 02 - 07/2016
www.larius.eu
PEGASO
24
V
B
C
A
CLEANING AND REPLACING THE SENSOR CLEANING
CLEANING
1) If present, insert a flexible hose (A), connected to
the water mains, or fill the tank with clean water;
2) Close the tap on the valve regulating the flow of
material from the pistol (B);
3) Turn on the spray gun and the pump, let the water
REPLACEMENT
• In the case of sensor failure or malfunction, use a size 30 he-
xagonal wrench for replacement operations.
Insert the wrench through the slot as shown in the photo and
remove the sensor from the rear.
WATER
circulate first in one direction and then the other,
inverting the rotation of the pump (“PUMP ROTA-
TION” selector).
4) Discharge the water into a recipient, from the spray
gun or from the recycle hose (C).
