15
PEGASO
English
P
6
4
8
10
12
2
0
500-700 mm
REGOLATIONS
FLOW ADJUSTMENT
• The flow of material must be adjusted at the sprayer
using the fluid flow regulator handle and the value is
shown on the display.
ADJUSTING THE AIR
• In order to decrease the air flow, turn the regulator
anticlockwise (
P1
).
• In order to increase the air flow, turn the regulator
clockwise (
P1
).
• Air passage opening and closing tap (
P2
).
NOZZLE SELECTION
• To select correct nozzle for your applications, consider
size of aggregate in material and coarseness of spray
pattern. Remember the larger the nozzle, the larger
the pattern (
P3
).
MATERIAL FLOW ADJUSTMENT
• Test spray pattern on card-board. Hold gun 18 to 30 in.
(500 to 700 mm) from surface. Use this spray distance
for most applications.
• Always proceed with regular strokes and circular
movements, overlap the strokes by 50%.
• Check the evenness of the material often and dilute
with water if necessary in order to maintain the suitable
level of evenness.
• Material flow should be adjusted on the sprayer using
the Fluid Flow Regulator knob.
• Engage trigger lock to hold trigger open and reduce
fatigue.
Summary of Contents for Pegaso
