K8
0.05
0.1
0.5
1
2
M
Ω
OK
0.05
0.1
0.5
1
2
M
Ω
NO
0.05
0.1
0.5
1
2
M
Ω
NO
Additiv
e
Product
0.05
0.1
0.5
1
2
M
Ω
K7
Product
Ed 004 - 06/2013
www.larius.com
STAR 3001S GUN
19
TEST
+
-
K9
M
Ω
K.d - PRODUCT RESISTIVITY TEST
The generator is supplied with a standard probe to perform the
resistivity test on the product to be used.
To perform the test, proceed as follows:
•
Connect the probe (
K7
) to the “
PAINT TEST
” plug (
K8
) on the
rear side of the generator.
•
Immerse the probe in the product to be tested making sure
that the top edge of the probe is completely covered.
Recommended range 0.5 ÷ 0.6 M
Ω
.
NOTE: Values are always to be verified according to product
in use and working conditions.
K.d.1 - Low resistivity
Low resistivity values result in a heavy-charged electrostatic
product with rebound effect.
K.d.2 - High resistivity
High resisitivity values result in a low-charged electrostatic product
with a weak wrap-around effect.
K.e - ADJUST RESISTIVITY LEVEL
To adjust and optimize the resisitivity degree of the product to be
applied, refer to materials technical specifications or directly contact
the suppliers, asking for any electrostatic additives or thinners able
to increase or decrease the product resistivity.
•
Press “
TEST
“ and verify the value expressed in M
Ω
on the
scale (
K9
) of the generator.
