DRAGON
13
English
MIN
MAX
•
Turn the pressure setting knob (
F6
) clockwise to the “CIR-
CULATION & WASHING” position
(drop symbol)
.
•
Point the spray gun into the collection container (
F7
) and hold
the trigger down
(in order to expel the oil contained)
until clean
liquid flows out.
Now, release the trigger.
•
Remove the suction hose and remove the bucket of cleaning
liquid.
•
Now point the spray gun (
F8
) into the container (
F7
) and press
the trigger to recover any cleaning liquid left.
• As the pump idles, press the “
OFF”
(0)
switch (
F5
) to stop
the tooling.
When this is complete, release the trigger.
Use a metal container (F7).
To avoid any risk of electric shock connect the
collection container to a surface that is earthed
(e.g. concrete)
and not to surfaces that will insulate
the container from the earth.
Absolutely avoid to spray solvents indoors. In
addition, it is recommended to keep away from
the pump in order to avoid the contact between
the solvent fumes and the electric motor.
For disposing of the washing liquid, see the re-
quirements laid down in the Standards in force in
the country in which the equipment is used and
act accordingly.
The Client is solely responsible for any irregular
action taken before, during, or after disposing of
washing liquid, or in interpreting and applying the
current Standards in this regard.
•
Now the machine is ready.
When water-based paint has been used, in addition to washing
using the cleaning liquid, we recommend washing with soapy
water and then clean water.
Hold the spray gun against the edge of the metal
contained (F7).
PREPARING THE PRODUCT
•
Mix and filter the product before using it.
MAKE SURE THE PRODUCT IS SUITABLE TO BE
USED WITH AN AIRLESS SPRAY GUN.
Make sure the product to be used is compatible
with the materials employed for manufacturing the
equipment (
stainless steel and aluminium
).
Because of that, please contact the supplier of the
product.
F6
Circulation
and washing
