DRAGON
10
English
Electrical safety precautions
•
Check the switch is on the “OFF” position before connecting
the cable to the mains.
•
Never carry a plugged-in equipment.
•
Disconnect the equipment before storing it and before perfor-
ming any maintenance operation or replacing of accessories.
•
Do not carry the equipment neither unplug it by pulling the
electric cable.
•
Protect the cable from heat, oil and sharp edges.
•
When the tool is used outdoors, use only an extension cable
suited for outdoor use and so marked.
•
Take care when the pumping rod is moving.
Stop the machine whenever someone is within its vicinity.
•
Repairs of the electrical equipment should only be carried
out by skilled personnel, otherwise considerable danger to
the user may result.
IF THE PRODUCT TO BE USED IS TOXIC, AVOID
INHALATION AND CONTACT BY USING PROTEC-
TION GLOVES, GOGGLES AND PROPER FACE
SHIELDS.
TAKE PROPER SAFETY MEASURES FOR THE
PROTECTION OF HEARING IN CASE OF WORK
NEAR THE PLANT.
Never attempt to tamper with the calibre of in-
struments.
SETTING-UP
CONNECTION OF THE FLEXIBLE HOSE TO THE GUN
•
Connect the high pressure flexible hose (
F1
) to the pump
(
F2
) and to the gun (
F3
), ensuring to tighten the fittings (
the
use of two wrenches is suggested
).
NEVER
use sealants on fittings’ threads.
It is
ADVISED
to mount a high pressure manometer at the
pump outlet
(see on page “Accessories”)
to read the product
pressure.
•
It is recommended to use the hose provided with the standard
kit (
ref.18036
).
NEVER
use a damaged or a repaired flexible
hose.
•
NEVER SPRAY OVER FLAMMABLE PRODUCTS OR SOL-
VENTS IN CLOSED PLACES.
•
NEVER USE THE TOOLING IN PRESENCE OF POTEN-
TIALLY EXPLOSIVE GAS.
Always check the product is compatible with the
materials composing the equipment
(pump, spray
gun, flexible hose and accessories)
with which it
can come into contact. Never use paints or sol-
vents containing halogen hydrocarbons
(as the
methylene chloride)
.
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
F
The conditions of guarantee do not apply in the
following situations:
- improper washing and cleaning of components
causing malfunction, wear or damage to the
equipment or any of its parts;
- improper use of the equipment;
- use that does not conform with applicable national
legislation;
- incorrect or faulty installation;
- modifications, interventions and maintenance that
have not been authorised by the manufacturer;
- use of non-original spare parts or parts that do
not correspond to the specific model;
- total or partial non-compliance with the instruc-
tions provided.
CONDITIONS OF GUARANTEE
F2
F3
F1
