5
5
Easy Install
Install Latch
a) Insert the latch and ensure it is paralleled to the door face.
Mark the outline of the faceplate, then take out the latch.
b) Chisel 1/8” (3mm) deep along the outline to allow the faceplate to be aligned with the door edge.
c) Insert the latch and tighten it with screws.
Note : please use tapping screws for metal door.
Install Strike
a) To identify the center of strike :
close the door, on the basis of the faceplate mark horizontal center line of strike.
Ensure the center of faceplate and the center of strike are aligned.
b) Use the mark as a guide outlines the strike.
Chisel 5/64” (2mm) deep along the strike outline to allow the strike to be aligned with the doorframe.
c) Insert the strike and tighten it with screws.
Note : please use ”tapping screws” for metal door.
