15
OWNER’S MANUAL
TOP VIEW
Make sure arcs
are aligned.
Outlet of Canister and
Rubber Nozzle
2
on the
pump should be aligned.
4
9
STEP 3: Pump Replacement/Reassembly
1. Lubricate the Canister Gasket
4
. Turn the Skimmer Canister
9
upside
down, place the Gasket into the inner groove at the bottom.
2a. If your Pump is removed from the pool, slowly insert the Motor Assembly
back into the upside-down Canister. There's a rib on the inside of
Canister (only visible from bottom), which needs to be aligned with an
indent at the bottom of the Motor.
2b. If your Pump is left attached to the pool, reach in through the Canister to
pull the Motor Assembly up and insert it back into the Canister. Make sure
to align the Rubber Nozzle
2
with the hose opening of the Canister,
otherwise the Pump may leak even already locked in place.
IMPORTANT: make sure that the cord of the
Motor Assembly
3
is placed through the Motor
Seal Nut
1
BEFORE replacing the Pump.
Close Up
BOTTOM VIEW OF PUMP & CANISTER
1
2
3
4
