background image

®

WARNING 

Safety Care for Children

1. Children, especially children younger than five years, are at high risk of drowning. Drowning occurs silently and quickly and can occur in as little as 2 in (5 cm) of water.

2. Keep children in your direct sight, stay close, and actively supervise them when they are in or near this pool and when you are filling and emptying this pool.

3. When searching for a missing child, check the pool first, even if the child is thought to be in the house.

4. Locate pumps and filters in such a way that children cannot climb on them and gain access to the pool.

5. WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.

6. WARNING:To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times by an adult who is capable of     

    assisting a child in distress.

7. SAVE THESE INSTRUCTIONS.

OWNER′S MANUAL

SURFACE SKIMMER 

FOR ABOVE GROUND SWIMMING POOLS

IMPORTANT SAFETY INSTRUCTIONS

When installing and using this product, basic safety precautions should always be followed.

READ AND FOLLOW ALL INFORMATION AND INSTRUCTIONS

 Keep for future reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children.

Sold & Distributed by Lark Outdoors, Austin, TX USA.   Assembly & Service by Polygroup Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong.

If you need help or encounter any problems, please call us at (888) 919-0070, between 8am - 5pm MST (extended operating hours may be available during holiday and peak seasons).

© 2020

Thank you for your Lark Outdoors purchase!  Should you encounter any problems, please DO NOT return the product to your place of purchase.   

For assitance with product setup, parts or troubleshooting, please visit support.polygroupstore.com, or call our customer service team at +1 (888) 919-0070. 

All warranty claims and parts requests must be made directly to our service & support partner, Polygroup. Depending on the nature of the concern, you may 

be asked to return all or part of the product for inspection or repair. Making it right is our top priority!

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

For answers to common questions, setup videos and troubleshooting tips, 

please visit our support center at: support.polygroupstore.com

or call Customer Service at: +1 (888) 919-0070

To order parts, accessories, 

and to learn more about our 

products, please visit: 

www.larkoutdoors.com

DO NOT RETURN PRODUCT TO STORE

PARTS LIST

Part #

Qty.

2

3

4

5

6

1

1

1

2

1

1

2

1

P58102301W05 P58102302E09 P5810223AW05 P5810228AW05 P5810224AP0

1

1

 P5810227AE09

Key

P5810233AP01

9

P58219221W05

8

Ring Pool

Holding Frame 

(Front)

Ring Pool

Holding Frame

(Rear)

Skimmer

Canister

Lock Nut

Skimmer

Basket

Frame Pool

Holding Frame

Description

Adapter

Hose Clamp

Hose

P58150036W01

7A

P58102461W01

7B

Summary of Contents for SURFACE SKIMMER

Page 1: ...ssembly Service by Polygroup Trading Limited Unit 606 6th Floor Fairmont House No 8 Cotton Tree Drive Central Hong Kong If you need help or encounter any problems please call us at 888 919 0070 between 8am 5pm MST extended operating hours may be available during holiday and peak seasons 2020 Thank you for your Lark Outdoors purchase Should you encounter any problems please DO NOT return the produc...

Page 2: ...sition If the Suction Sitting of your pool is the same type as illustrated in 6 1 attach the Adapter to the Suction Fitting and screw tightly 6 1 1 9 8 7A Suction Fitting 7A Insert the Skimmer Basket 6 into the Skimmer Canister 4 Connect the hose into the hose connector on the bottom of the Skimmer Canister 4 and fasten the hose by hose clamp Turn the Lock Nut 5 in clockwise to tighten the Frame P...

Page 3: ...Rear 3 Tighten the Lock Nut 5 in clockwise to fix them by hand 1 5 3 2 5 4 2 Insert the Skimmer Basket 6 into the Skimmer Canister 4 Connect the hose into the hose connector on the bottom of the Skimmer Canister 4 and fasten the hose by hose clamp 3 6 4 If the Suction Fitting of your pool is the same type as illustrated in 6 2 remove the Suction Fitting Screen from the Suction Fitting Base first A...

Page 4: ... Fitting Base and fix tightly 6 2 9 7B Suction Fitting Screen Suction Fitting Base If the Suction Fitting of your pool is the same type as illustrated in 6 1 attach the Adapter to the Suction Fitting and screw tightly 6 1 7A 9 8 Suction Fitting 7A 7B Loosen the Lock Nut 5 in anti clockwise by hand and adjust the position of the Skimmer Canister 1 on the Ring Pool Holding Frame The position of the ...

Reviews: