Step 8 Mount Pedals
6
mm
15
mm
R
L
L
R
Driveside tightens clockwise
Non-driveside tightens
counter-clockwise
Pedals
R
To mount the Pedals, thoroughly grease the threads
and start by turning each pedal in with your fingers,
making sure they are on their corresponding side
and started correctly so you don’t cross the threads!
Afterwards torque to (40 Nm) with pedal wrench or
6mm hex.
(FIG. A & B)
Components
Tools
FIG. A
FIG. B
L
Remember to put grease on the pedal
threads. The pedals is marked with L or R
so you know which side they fit.
Do not force the pedals into
the crank arms!
8.0
