Step 1
Foldable Seat: Loosen 2 nuts and
2 bolts on the back of the Bullitt
frame with 5mm Allen Key and
13mm Wrench.
Armrest in Canopy: Loosen 2
nuts on the armrest on the inside/
outside of the Canopy using 5mm
Allen Key and 13mm Wrench.
Larry the King says:
“If you have installed the
Bullitt Foldable Seat and want
to replace it with the Twin Seat,
you loosen the two bolts and
two nuts and remove the Seat,
before you follow the rest
of the manual.”
Two tips before you start installing the Twin Seat,
if you have the Foldable Seat mounted!
Both sides
Nuts
Bolts
1
2
2
4
Summary of Contents for Twin Seat
Page 1: ...Twin Seat Assembly Manual...
