Larsen & Brusgaard
LogTrackII Operating manual
11. Changing Trigger Altitudes
1.
Press
and release quickly. The
I
icon will turn on and off (disappear)
2.
When
the
I
icon appears again, immediately press
and keep it pressed.
The
I
icon will disappear again
3.
When
the
I
icon appears again, release
immediately
1.
The
LogTrackII
now flashes
in the Start Trigger Altitude.
2.
Press
or
to change
Start Trigger Altitude.
3.
Press
again and the Stop Trigger Altitude flashes.
4.
Press or
to change Stop Trigger Altitude
5.
Press
again and the Feet / Meters icon flashes
6.
Press or
to change between Feet / Meters
7.
Press
again to leave “Change Trigger Altitude”
Note:
If setting Start trigger altitude to 0, Automatic Start and Stop is disabled and only manual
start / stop is possible.
Tuesday, May 18, 2010
Page
14
