Model 820 Technical Reference Manual
Setting Parameters Using Numbers and Other
Step 1
To enter a name, for example, turn the Model 820 on
and press these keys to access the first name field:
R m 0 2
e
:
All but the last of these screens you
have seen before. This display is to
set one of four custom instrument
name screens which will appears
each time you turn the instrument
on.
Step 2
Press
m
.
Notice the parentheses begin to
flash and the (f) changes to (n) and
the (L) is underscored (Larson-
Davis). You may now enter the
appropriate letters here by using
the “Alpha Character Keyboard
Entry” shown above.
Step 3
Press
U
.
The flashing (n) is replaced by (S)
and will remain for five seconds.
At this time you may select any
character from the S-table, press
that key and it will replace the let-
ter at the cursor (_). The cursor
then moves to the next letter
Step 4
Press
U
twice.
The (n) is replaced by (2) for five
seconds. Letters from the 2-panel
are available for entry.
_
