4-6
Setting Parameters Using Numbers and Other Characters
Model 820 Technical Reference
Step 5
Press
U
three times,
Example: To enter the company name of
Larson
Davis
in the first line, follow these steps:
a.
To access the Name Display turn on the meter.
Press
R m 02 e
.
b.
Press
m
to place the cursor at the beginning
or use the
l
or
r
to position the cursor.
c
. To clear the field, if necessary, press
U
twice
and the
l
key.
d.
The letter (L) is on the S-field. Press
U
.
e.
The letter (A) is on the S-field. Press
U
again.
f.
The (R,S,O) keys are in the 2-field. Press
U
twice to access the 2-field.
g.
To
Clear
the field, press
U
twice to access
the 2-chart and press the Clear key.
h.
To replace a character with a Space, press
U
twice to access the 2-field and press the Space key.
A (3) will appear for five seconds.
The letters from the 3-panel are
available for entry.
The display in Step 1 above will
appear.
If you change your mind about
clearing the field, hit
c
to
return to the original title. Repeat
a and b in Step 5 to return to this
point.
Enter the (L) key, second from the
lower left. The cursor will auto-
matically move to the next letter.
Enter the (A) key.
Enter the (R,S,O) keys consecu-
tively or one at a time.
Complete the rest of the entries in
the same fashion.
Step 6
When the first line is completed press the
d
to go
to the next field, the second line.
Step 7
Press
m
and select the appropriate chart by
pressing
U
and the desired character key.
Three lines are available for entry,
i.e. company address, telephone.
Step 8
When the second line is complete, press the
d
to go
to the next field, the third line, and repeat the pro-
cess.
Step 9
The fourth line is for the Measurement Title. Press
the
d
key.
The first/fourth lines appear on
screen when the 820 is turned on.
