3 Structure and Function
3.1
Intended Purpose Usage
Important
Before setting the unit to work, read the technical documentation
carefully.
Important
The latest version of the technical documentation or the corresponding
technical supplements is valid in each case.
The
camera
is built using modern components and is extremely reliable in
operation; however it must only be used for its intended purpose. Please note that
the intended purpose also includes compliance with the instructions issued by the
manufacturer for installation, setting up and service.
Any other use is regarded as conflicting with the intended purpose. If the equipment
is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired. The manufacturer is not liable for any subsequent
damage resulting from such inadmissible use. The user bears the sole risk in such
cases.
3.2
Transportation and Storage
All
camera
devices must be so transported and stored that they are not subjected to
any excessive mechanical stresses.
3.3
Authorized Persons
Only persons trained for the purpose are authorized to handle the
camera
; they must
be familiar with the unit and must be aware of the regulation and provisions required
for explosion protection as well as the relevant accident prevention regulations.
3.4
Cleaning and Maintenance
The
camera
and all its components require no maintenance. All work on the
camera
by personnel who are not expressly qualified for such activities will cause
the Ex approval and the guarantee to become void.
3.5
Safety Precautions
Important
For the installation, maintenance and cleaning of the units, it is
absolutely necessary to observe the applicable regulations and
provisions concerned with explosion protection (EN 60079-0, EN 60079-
14) as well as the Accident Prevention Regulations.
ATX-EXPCMR-BP-HH-QXGA
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
6
of
10
