3.6
Cleaning and Maintenance Intervals
The cleaning intervals depend on the environment where the system is installed.
3.7
Aggressive substances and environments
The
camera
is not designed to come into contact with aggressive substances or
environments, please be aware that additional protection may be required.
3.8
Exposure to external stresses
The
camera
is not designed to be subjected to excessive stresses e.g. vibration,
heat, impact. Additional protection is required to protect against these
external stresses. The
camera
will require additional protection if it is used in a
location where it may be subjected to damage.
The
camera
may be fitted with the optional antistatic rubber boot accessory
supplied by
Larson
. However, this does not guarantee any additional impact
resistance, and due care must still be taken to avoid damage to the unit, and to
inspect it before taking into a hazardous area.
ATX-EXPCMR-BP-HH-QXGA
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
7
of
10
