EPL-SBDL-150RT-72
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
This explosion proof light is designed for illumination of industrial locations. It uses the latest in
solid state lighting technology for long life, low maintenance and high efficiency.
The unique design focuses the light where it is needed, giving improved efficiency over a
conventional HID luminaire.
An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from
any nominal
100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC.
WARNING
To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected
and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
•
Be certain electrical power is OFF before and during installation and maintenance.
•
Luminaire must be connected to a wiring system with an equipment-grounding conductor.
To avoid explosion:
•
Make sure the supply voltage is within the luminaires’ voltage rating.
•
Ensure the marked T rating is less than the ignition temperature of the Hazardous
Atmosphere.
•
Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
•
Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
For supply connections, use wire rated for at least 110°C
Recommended mounting height is 25-40 feet.
MOUNTING/ADJUSTMENT
The high output LED light head is mounted to an adjustable two-part swing arm constructed of light
weight aluminum. The two piece arm design provides two pivot points, one at the mounting bracket
and one in the center of the swing arm. The aluminum swing arm swings 170° from the mounting
bracket point and 340° from the center pivot point, while the light head is vertically adjustable up to
270°, providing full adjustability for this 150 Watt explosion proof LED fixture and allows users to
position the light as needed during operations. This switch blade swing arm can be mounted with the
light head oriented on the top side or bottom side of the arm, allowing operators to illuminate objects
in any location. This swing arm is ideal also for mounting the unit to loading door areas and docks for
use as a loading bay or dock light.
150 Watt Explosion Proof C1D1 LED Switch Blade Dock Light - 6' Pivoting
Aluminum Arm - 17,500 Lumens
Instruction Manual
