background image

 

Larson Electronics LLC     www.LarsonElectronics.com     sales@larsonelectronics.com

 

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 

EXP-LED-1XB-9W 

SPECIAL FEATURES 

 

Specially compounded rugged material 

 

Battery impact protection 

 

Ergonomic pistol grip handle 

 

Non-Sparking rotating metal hook incorporated in rear end cap to hang unit 

 

Battery fuel gauge indicator light 

 

Patented intrinsically safe electrical system 

 

Selectable beam or work light setting 

 

Soft bumpers for impact protection of light head 

 

Light can set on its base or hung by hook 

 

Two position switch (ON/OFF) 

 

Specially designed heat sink to ensure long LED life 

 

Chemical resistant clear lens cover 

 

Optional red lens cover for night use 

NOTICE 

 

Read the operator’s manual entirely before using the light. 

 

Charge battery as described below. 

 

After installing fully charged battery in light, you will have 8 hours of continuous use. 

 

Battery has an LED indicator light that will start blinking when there is approximately 30 minutes 
until light shuts off. Blinking feature will slow as the battery reaches shut off point. 

 

Light will not come back on until charged. The charge will reset the circuitry. 

 

To adjust light from task light to spot light, push lens in for wide angle task light or pull lens out 
for beam spotlight. 

 

To pivot head, loosen clamping knob just enough to pivot head where desired, then tighten 
knob. 

 

Switch has ON/OFF mode. Press the switch until you hear a click to lock in ON or OFF position. 

 

For long term storage, fully charge the battery and disconnect it from the light. Store battery 
and light separated in a cool dry area. Make sure to recharge battery every three months if not 
in use. 

 

CAUTION:

 If the light is being used in a remote darkened area and the fuel gauge indicator light 

begins blinking, we recommend exiting the darkened area to replace spent battery with a fully 
charged battery. 

 

  Clean the lens with a damp cloth with mild detergent or waterless hand cleaners. Take caution 
not to scratch lens in order to provide the best light output at all times. 

Reviews: