IND-MD-DF-ESF-R3
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
BEFORE OPERATION: install gaskets where needed.
•
Unit
may need gaskets replaced as it is used over time. Unit comes with a black gasket preinstalled on the end of
the sprayer wand where a wand attachment may be connected.
1.
If this gasket needs to be replaced, first take off any wand attachment to locate the gasket.
2.
Remove the gasket from the wand and replace with a new one.
a.
Make sure when putting the new gasket on it is flush with the base so it forms a tight seal when
connected.
3. Connect desired wand attachment and make sure it is screwed on tightly so a liquid tight seal is created at
the base
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
IND-MD-DF-ESF-R3
is designed to provide years of reliable performance. Should the need for replacement parts
arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
SALES@LARSONELECTRONICS.COM
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
