Megatower
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
19 of 6
7
4.
6.)
Connect the light head safety latch at
the rear of the trailer. Turn the key on the control
box to the off position and take it out. The unit
is now fully powered down.
4.7.)
Engage the safety pin at the base of the
mast to secure the mast in place fully. You
may now retract all the outriggers first and
then leveling jacks to return the unit to transport
position.
4.8.)
The trailer is now ready for hookup to a tow
vehicle. Once tied to a tow vehicle, raise all
leveling jacks. Ensure that safety chains, brake-
away device, and trailer lights are connected.
Test trailer lights to ensure stop/tail/brake lights
work before operating vehicle on public
roadways.
If you have any questions about your
new device please call the Manufacture
r
.
F
igure
4.
6
F
igure
4.
7
