Megatower
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
22 of 6
7
5.1.4.)
The
circled
wire seen
in
figure 5.1.4
is to be disconnected.
It is
the skinnier green wire that goes into
the
neutral
bar on the back of the
panel.
5.1.5.)
Once you are supplying your
own power and are bypassing the
generator, the orientation of the below
switch will automatically trip from A
position, an upward facing position, to B
position, the downward facing position
seen
in figure 5.1.5. The switch has a
yellow face to it.
F
igure
5.1
.
4
5.1.6.)
After external power source is
connected, replace cover.
NOTE: This
panel emits high voltage when
powered. We recommend a licensed
electrician install external power
supplies when wanting to bypass
the unit's generator.
F
igure
5.1
.
