SPLED-QP-1X10WRE
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
3
10W Portable Solar Powered Quadpod LED Light - 12 Hr Run Time - Day/Night
Photocell or Motion Sensor
Instruction Manual
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE FIXTURES VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
RISK OF FIRE/ELECTRIC SHOCK –
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
RISK OF PERSONAL INJURY –
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE
SPLED-QP-1X10WRE
MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL
CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING:
MAKE SURE POWER IS TURNED
OFF
BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
MOUNTING
The SPLED-QP-1X10WRE is mounted on an aluminum quadpod mount that allows for simple and easy movement around
temporary work areas and easy deployment, transportation and storage. The quadpod mount on this solar powered LED
light is powder coated which allows it to resist corrosion and increases the durability of the mount. A glossy blue powder
coat color lends to the aesthetics of the unit.
The Larson Electronics SPLED-QP-1X10WRE Quadpod Mounted Solar Powered LED Light is an ideal portable lighting
solution for remote areas and temporary standalone applications where connection to external power is either impractical or
unavailable. This rechargeable solar powered LED light is offered in a spotlight or floodlight beam pattern and several different
operating configurations, making it ideal for remote applications. The portable quadpod mount makes the SPLED-
QP-1X10WRE simply to move around work areas and folds up for even more portability and for storage options.
QUADPOD
ASSEMBLY
The
quadpod
assembly consists of 3 parts:
1.
Light head
2.
Pole w/Legs
3.
Wheel base
To assemble
quadpod
, begin by placing the legs over the wheel base. Tighten bolt to secure the wheels. The
quadpod
can now be
rolled around on its wheels. Ensure the legs are folded up before tilting
quadpod
to maneuver.
WARNING:
Use caution before tilting
quadpod
with a heavy load. For heavy loads, it is recommended to remove the light head prior
to transporting via wheel base! Failure to do so may cause serious injury or death. Larson Electronics shall not be held liable for
injuries caused by misuse.
