L’ARTISTICO SRL |
EN
25
Cod. 40115 | Rev. 19 | 05/2021
• When the appliance is in operation, there is a strong overheating of
the surfaces, the glass, the handle and the piping: during operation,
especially the external surfaces, they reach high temperatures to the
touch; maneuver carefully to avoid burns, these parts can only be
touched with adequate protection..
• Do not place the remote control too close to the appliance when it is
in operation because heat may damage it.
• Do not put laundry on the appliance: dangers of fire.
• Any clothespins and the like, curtains, non-heat-resistant and / or
inflammable objects must be kept at a suitable distance from the
appliance.
• The protective grille inside the pellet tank should never be removed.
• Never open the appliance door during operation.
• Do not operate the appliance with the door open or broken or
cracked glass.
• It is forbidden to operate the appliance without the ash drawer (if
fitted).
• The manual removal of accumulation of pellets (unburned and not)
in the brazier is mandatory before proceeding with a new ignition to
avoid the formation of smoke and unburned during ignition and / or
during normal operation.
• Warn children and guests of the above dangers.
• Pay attention in the presence of children, avoid that they stay in front
of the appliance.
• In the event of anomalies, the product can only be restored after the
problem has been restored.
• Carefully follow the maintenance program.
• Do not clean the stove until the structure and ashes cool down
completely.
• Cleaning and maintenance to be carried out by the user must not be
carried out by children without supervision.
• Do not touch the generator if you are barefoot and wet or wet body
parts.
• It is forbidden to modify safety or regulation devices without the
manufacturer's approval or directions.
• The appliance is connected to the mains by means of a plug, this
must be easily accessible with an installed stove.
• Verify that the electrical system and sockets are of Norma and have
the ability to withstand the maximum absorption of the appliance on
the label and on the manual.
• It is recommended to position the power cord so that it does not
come into contact with hot parts of the appliance.
• Do not make any unauthorized changes to the appliance.
• Use only original spare parts recommended by the manufacturer.
• Do not leave packing items in the reach of children or unauthorized
persons.
• After a long period of non-use, check for any obstructions before
switching on the appliance.
• The appliance is designed to operate under any weather conditions,
in the event of adverse weather conditions (strong wind, frost), safety
systems may be triggered by the generator switched off. If this is the
case, contact your service representative and, in any case, do not
disable security systems.
• If there is a fire in the chimney, have adequate systems to suffocate
the flames or request the intervention of firefighters.
• Since the product can switch on independently using a
chronothermostat, or remotely via dedicated applications, it is strictly
forbidden to leave any combustible object within the safety distances
indicated on the technical data label.
Never turn on the appliance without first
carrying out the inspection and daily cleaning
as described in the Maintenance chapter of this
manual.
The brazier must be completely clean and
empty before each ignition / re-ignition,
whether the latter is done manually, or in the
case
of
programmed
ignitions
with
a
chronothermostat, via the stand-by function or
remotely via the app (danger of explosion).
6. DISPOSAL OF EQUIPMENT AND
PACKAGING
The waste bin symbol indicates that the product, at the
end of the life cycle, must be handed over to the
appropriate collection centers set up by municipalities or
urban hygiene companies. Properly differentiated
collection helps to avoid possible adverse effects on the
environment and health and favors the recycling of
materials that are made up of the equipment.
Disposal of Waste Electrical and Electronic Equipment
(WEEE), pursuant to Legislative Decree 14 March 2014,
no. 49 implementing the 2012/19 / EU Directive and
WEEE on the disposal of waste electrical and electronic
equipment.
The packaging is intended to protect the goods from any damage that
may occur during transport operations. The materials used for
packaging are recyclable, so they are selected according to
environmentally friendly and easy disposal methods for reintegration
into production cycles. Refer to applicable local disposal regulations
for all wood, board and plastic packaging materials. Do not dispose of
any packaging or product in the environment. Keep packing materials
out of the reach of children
Correct disposal of the batteries in this product
(Applicable in countries with separate collection
systems)
This marking on battery, manual or packaging indicates
that the batteries in this product should not be disposed
of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or
the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
7. HANDLING AND STOCKING
The cardboard/wood package has been designed to protect the stove
but cannot be stocked in outdoor or in very damp places. It must be
exposed to the elements, otherwise some components or the stove
itself could get damaged and the guarantee will decline. Since stoves
have some sensitive parts like glasses and electronic components,
should be handled following few basic rules:
Lift and lay down the stove gently. In case you use a two wheel trolley
or when transporting upstairs, always take the stove at the side
opposite to the glass (which is identified by a sticker). The glass is
always on the sticker side.
