DIMENSIONS
All dimensions in mm (inches)
BATTERY REPLACEMENT
We recommend that you replace the battery every 12 months, or prior to logging critical data.
The EL-USB-1 does not lose its stored readings when the battery is discharged or when the battery is replaced; however, the data logging
process will be stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded to a PC.
Only use 3.6V 1/2AA lithium batteries. Check with your supplier that the battery you are ordering is ‘press fit’ and is not fitted with solder
tags. Before replacing the battery, remove the EL-USB-1 from the PC.
Note:
Leaving the EL-USB-1 plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.
WARNING
Handle lithium batteries carefully, observe warnings on battery casing. Dispose of in accordance with local regulations.
EL-USB-1
Temperature Data Logger with USB Interface
98.0 (3.86)
26.0 (1
.02)
Internal Temperature Sensor Location
www.lascarelectronics.com
26.8 (1
.05)
Specifications liable to change without prior warning
Issue 12 07/2012 S.L Applies to EL-USB-1 Page 3 of 4
