EL-WEM Quick Start Guide
Wireless Indoor Air Quality Monitor
Your data, anytime, anywhere
Short Press
<1s
Long Press
Between 1s and 10s
Press and Hold
>10s
Function
Turn the device on, force
data synchronisation with
the Cloud, create audit
mark on the Cloud, mutes
the sounder if in alarm
Turn the device off
Start CO
2
Calibration Mode
(EL-WEM+ only)
The power button has the following functions:
Set up a Cloud Account
1
Getting to know your WEM
2
To begin setting up your EL-WEM, you first need
an EasyLog Cloud account:
• Visit
easylogcloud.com
and click Sign Up Now
• Next, download the EasyLog Cloud App onto
your phone or tablet
EasyLog Cloud harnesses the power of IoT to automate data
logging and alert notifications. EasyLog Cloud gives you the
ability to monitor and manage multiple data logging devices
in different locations completely remotely.
The system easily scales to meet your needs. Perfect
for everything from compact systems with just a few
measuring points to corporate solutions with thousands
of devices around the globe.
WARNING: Failure to follow these safety instructions could result in fire, electrical shock, other injury or damage.
Repairing or modifying
Never attempt to repair or modify this product. Dismantling may cause damage that is not covered under the warranty. Servicing
should only be provided by an approved supplier. If the product has been punctured, or seriously damaged do not use it and
return it to an approved supplier.
Power supply
Only use a genuine EL-WEM power adapter to power your EL-WEM air quality monitor.
Disposal and recycling
You must dispose of this product according to relevant laws and regulations. This product contains electronic components and
therefore must be disposed of separately from household waste.
Safety Information
Turn on your EL-WEM
3
Plug in the power supply using
the USB cable provided.
Press the button on top
of your EL-WEM to turn
it on.
When you
first turn
your EL-WEM on, the
blue light in the power
button will flash. This
indicates the EL-WEM is
not currently connected
to a WiFi network.
For the first 5 minutes after you
turn on your WEM, the sensors
self-calibrate. You may not
see readings for all the
sensors on the Cloud
during this time.
1
2
3
Supply Voltage: 5Vdc, 1A
IP Rating: IP40
Resetting your EL-WEM
Reset
Done by pressing the Reset Button
• Device will restart, all stored data and the configuration
will be retained
Power Button
Status Ring
Power Socket
Setup Button
Reset Button
Bottom Of Unit
Factory Reset
Done by pressing the Setup Button for more than 10s
• Erases all stored data
• Erases all configuration
• Reverts to default settings and restarts the device
4
Done by pressing the Setup Button for more than 3s
•
For connecting to the Cloud - see Section 4 of this guide
Setup Mode
