DAB-DG108
USER MANUAL
4
DAB+ MODE
Press the DAB/FM button to set the device to DAB+ or FM radio mode
IMPORTANT: Perform a full station auto-scan before using your DG108 for the first time
Auto Scan:
1)
Press the Scan button to perform a full scan.
IMPORTANT: Digital Radio’s do not pick up new channels automatically. When moving from one
location to another, it is recommended that you perform another full scan. You may be unaware of
new stations in your new location.
Manual Scan:
1)
Hold the Enter button until the text “ Manual Time” is displayed
2)
Using the Up and Down buttons, mov through the frequency to find your station
3)
Press the Enter button twice to confirm the frequency and to exit
FM MODE
Press the DAB/FM button to set the device to FM mode
Auto Tuning:
1) To scan upwards, press the Scan button to tune to the next available station
2)
To scan downwards, hold the Scan button to tune to the next available station
Manual / Fine Tuning:
1)
Press the Up button to increase the frequency by 0.05MHz increments
2)
Press the Down button to decrease the frequency by 0.05MHz increments
SETTING UP PRESET STATIONS
Your DG108 can store up to 10 DAB+ and 10 FM station presets (favourites) for quick access
Storing a station preset:
1)
Tune your radio to the station you wish to store as a preset
2)
Press and hold the Preset button until the text “Preset Empty 1” is shown
